Options such as delayed start and preheat mode provides the flexibility that is required to make pre-treatment work in parallel with other processes.
Quality control reports from the pre-treatment process can be printed directly from the user-friendly software, while additional confidence in the procedures come from features such as no-boil option and low-fluid warning at 5 mm below the frosted label area of a slide. One set of wires delivers the current used for measurement, and the other set measures the voltage drop over the resistor. In a 4-wire RTD configuration, two wires link the sensing element to the monitoring device on both sides of the sensing element. With PT Link, pathology laboratories can maximize productivity by reducing the number of operations needed in the pre-treatment process, while saving time by using the same slide rack from pre-treatment all the way through the immunohistochemical staining. This effect can be minimized by using a three-wire bridge configuration.
The Dako PT Link allows the entire pre-treatment process of deparaffinization, rehydration and epitope retrieval to be combined into a well-documented, 3-in-1 specimen preparation procedure. Polyimide insulation available on selected models (See specification and order options)ģ.0 seconds (case style A) to 1.Description Dako PT Link PT100 Slide Stainer all RTDs have 100 0.12 platinum element, TCR 0.00385 //C (pt100 per IEC 751 Class B). Stranded copper with PTFE insulation stainless steel overbraid optional (one sleeve covers all leads). standard flexible heaters, Mincos experienced design. Models S12414, S13282 and S101910: Stainless steelįactory applied babbitt tip, available on case style A or B, reduces the danger of overheating the sensor when installed in babbitt layer
#Minco pt100 series
Supplied with AC171 spring and AC172 series ring (case style B only) Flange Diameter (in) 0.25. Temperature Range for IECEx Approved Bearing Embedment Sensors - Resistance Temperature Detectors (RTD) or Thermocouple FEP over stainless steel braid, with elastomer fill and PTFE insulated leads. Temperature Range for ATEX Approved Bearing Embedment Sensors - Resistance Temperature Detectors (RTD) or Thermocouple With PT Link, pathology laboratories can maximize productivity by reducing the number of operations needed in the pre. Find many great new & used options and get the best deals for PT100 Bearing Rtd Temperature Sensor 10 Long. Product Details English Metric Minco point sensitive RTDs are RoHS compliant and feature surface or pressure-sensitive mounting, and polyimide, silicone rubber or Mylar insulation. Temperature Range for Bearing Embedment Sensors - Thermocouple The Dako PT Link allows the entire pre-treatment process of deparaffinization, rehydration and epitope retrieval to be combined into a well-documented, 3-in-1 specimen preparation procedure. Temperature Range for Bearing Embedment Sensors - Resistance Temperature Detectors (RTD) International Electrotechnical Commission Explosive (IECEx) Approved Bearing Embedment Sensors Element Temperature Coefficient of Resistance (TCR)Įxplosive Atmosphere (ATEX) Approved Bearing Embedment Sensors
0 kommentar(er)
